AGCO / Massey Ferguson Error Code H0200 — What It Means and How to Fix It
Applies to: MF 7714, MF 7718, MF 7722, MF 7726, MF 8727, MF 8730, MF 8735, MF 8740
Electronic Brake Control — Hydraulic Pressure Fault
The electronic brake control system has detected a hydraulic pressure fault. Brake response may be reduced — operate with caution.
Repair difficulty
Workshop recommendedRepair time
2h
Dealer cost
$600-2000
Likely causes
- 1
Low brake accumulator pressure— Most likely
The brake accumulator maintains pressure for emergency braking. It slowly loses pressure over time as the diaphragm ages. Pre-charge pressure should be checked.
- 2
Failed brake pressure sensor— Possible
The sensor reports accumulator pressure to the EBC module. A faulty sensor will generate this code even if actual pressure is correct.
- 3
Leaking brake hydraulic circuit— Less common
A leak in the brake supply circuit will slowly deplete the accumulator. Check for wet spots around brake cylinders and the accumulator itself.
Parts needed
- Search for this part →
Brake accumulator
OEM: 3906822M1$320
- Search for this part →
Brake pressure sensor
OEM: 4234751M1$88
Tools needed
- brake pressure gauge
- nitrogen charging kit (for accumulator)
- wrench set
Related codes
Want alerts when we add new codes? Drop your email.